Proper Synthetic Turf Installation requires a good amount of planning. First, prepare the area for installation by spraying it with weed killer at least two weeks before the installation project. This will ensure that the entire plant material is dead to the roots. Then, carefully lay the turf. It is crucial to follow the installation process carefully so you don’t damage the turf. Here are some tips for proper installation. To make the process easier, you can recruit help from friends.
Artificial turf requires minimal maintenance and will pay for itself in three to five years. However, regular cleaning and dusting is required for the artificial lawn to last. You can use a stiff-bristled broom to remove debris or a mechanical brush to clean the area. To remove mud, you can also use a hose. However, if you have children, you should never use a hose to water your lawn.
To install the turf properly, it is essential to prepare the area beforehand. If you’re laying synthetic turf on top of an existing lawn, you’ll need to install edging, curbing, and base material first. In addition, consider tree roots and pest control before laying the turf. To save time and labor, draw out a design layout beforehand. Measure the area to be covered with the turf so you’ll know how much material to order. Also, prepare all the tools you’ll need beforehand.
After laying the turf, you’ll need to spread the infill between adjacent turf edges. Spread the infill evenly between the turf’s edges. Then, you can use a stiff-bristle broom to spread the infill evenly in lifts. Afterward, you’ll need to groom it. The water helps activate the glue in the seams, so you’ll have to be extra careful when applying infill.
Before installing synthetic turf, ensure that your roof is stable. Moreover, turf can add additional weight to the rooftop, balconies, and mezzanines. To avoid this problem, install an appropriate drainage system. This grid allows water to escape. Without proper drainage, synthetic turf can suffer from thermal contraction and buildup of contaminants. If you don’t have adequate drainage, you can opt for an alternative method of installing the turf. The installation process will take much less time than if you don’t follow the steps above.
The final step of synthetic turf installation is to fill the turf with infill. The infill will make the turf look and feel better. If you’re using recycled tire crumb as infill, it may cause problems, but the ceramic coated sand infill is completely safe. You can even ask your installer about the proper infill for your synthetic turf. If you’re unsure, you can always check the product label.
Choosing the right artificial grass is crucial, as there are many varieties available. Choose a type that suits the area you’re planning to install it in. It’s important to select a professional synthetic turf installation service for high-traffic areas and homes with pets. You don’t want to end up with an installation that looks mediocre. You can contact US Turf for installation services. You won’t regret it.
Learn more today from our blogs!
Recent Comments