Artificial Turf installation may seem like a very technical job to do, but it is not at all. Follow simple
guide on how to set up artificial turf for a professional look without the hefty expenditure. In fact, this
is the easiest way to lay artificial turf on your own lawn. You do not have to contact many artificial
turf installation firms because there’s an easy way around it.
Just follow laid out the pattern, and you will have an amazing artificial turf lawn in no time at all.
Artificial Turf installation is a big and expensive task, however with the right guidance, you will be
able to lay artificial turf on your own lawn within a couple of hours. Before starting out with artificial
turf installation, it is important that you read on the entire installation procedure properly. Artificial
Turf installation guide can help you to complete the installation task without any issues.
Artificial Turf installation requires a good base preparation work. The reason behind it is that laying
down the artificial turf needs some sort of base material. The base material helps the turf come in
place after the installation. For instance, if you are installing rubber turf, you should begin by
removing the old sod from your garden. Once you are done with the removal, lay down the new
synthetic grass on the base preparation.
Once you are through with the base preparation, you are now ready to start installing the artificial
turf. Artificial Turf installation is quite easy if you know exactly how to go about installing it. If you
have no prior experience of laying artificial turf, then it is better to hire a professional to get the job
done for you. However, if you think that you can handle laying artificial lawn, then it is not that
difficult as you think. All you need is to be careful when cutting the grass and keep in mind few
important things so that your lawn looks great after the installation of artificial turf.
When installing artificial turf installation, it is best to prepare the ground for installation by making use
of heavy duty steel blades and strong nails. Moreover, before installing, it is also advisable to
prepare the top most layer of the turf. The first thing to be done is to rake the ground and make sure
that the depth is greater than six inches so that the blades will not slip on the uneven ground. After
this, cut the lawn manually or electrically with the help of electric blade mower.
Now, it is time to fill up the holes with infill and remove the grass clippings. Once the grass clippings
are removed, it is better to spread the sand evenly over the patch. You can use a long handled
broom to spread the sand uniformly across the patch. In order to avoid unevenness, it is advisable to
leave about one inch of space between the blades. Now, lay the blades evenly on the sand and
adjust the height as per the requirement. Finally, place the blades at the corners.
Learn more today from another one of our great reads!
Recent Comments